TM 9-2320-289-20
9-5.
PINTLE ASSEMBLY REPLACEMENT (M1009).
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Materials/Parts
• One cotter pin
• Four
Iockwashers
• Grease (Item 26, Appendix C)
Too/s/Test Equipment
• Torque wrench
Manual References
• LO 9-2320-289-12
a.
REMOVAL
1.
Remove
2.
Remove
spacers
cotter pin (4), nut (3), and washer
4 nuts (5), Iockwashers (6), and
(7). Discard Iockwashers.
(2). Remove pintle hook (10). Discard cotter pin.
bolts (9). Remove 2 brackets (1 and 8) and 2
TA49706
9-8
