TM 9-2320-289-20
9-4.
PINTLE ASSEMBLY REPLACEMENT (ALL EXCEPT M1009 AND M1010).
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Equipment Condition
Materials/Parts
• Spare tire removed. (See paragraph 9-10)
• One cotter pin
•
Four
Iockwashers
• Grease (Item 26, Appendix C)
Tools/Test Equipment
Manual References
•
Torque
wrench
• LO
9-2320-289-12
1.
Remove cotter pin (4), nut (3), and washer (2).
2.
Remove 4 nuts (5), Iockwashers (6), bolts
Iockwashers.
Remove pintle hook (10). Discard cotter pin.
(9), and 2 brackets (1 and 8). Discard
TA49705
9-6
