TM 9-2320-289-20
9-7.
REAR BUMPER SUPPORTS REPLACEMENT (ALL EXCEPT M1009).
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Equipment Condition
Materials/Parts
• Rear bumper removed. (See paragraph 9-6)
• Six locknuts
Tools/Test Equipment
• Torque
wrench
a.
REMOVAL
NOTE
Rear bumper supports are removed the same way on both sides.
1.
Remove 2 locknuts (6), washers (2), bolts (1), and tow hook reinforcement
locknuts.
2.
Remove 2 locknuts (8), 2 bolts (4), and bumper brace (9). Discard locknuts.
3.
Remove locknut (11), washer (10), and bolt (5). Remove locknut (7), bolt (13),
clevis bracket (12). Discard locknuts.
(3). Discard
and tie-down
TA49709
9-14
