TM 9-2320-289-20
8-9.
STEERING WHEEL AND DIRECTIONAL SIGNAL LEVER REPLACEMENT
(Con’t).
3.
Install spring (6), eyelet (7), and insulator (8). Install nut (9) and tighten to 30 Ib.-ft. (41 N•m).
Install clip (10). Position horn contact spring (2) with bowed part facing outward, and install
horn bushing (3) and cup (4), Install 3 screws inside cup. Install horn button cover (5).
FOLLOW-ON TASKS:
• Connect both battery negative cables. (See paragraph 4-38)
• Check horn operation.
TA49730
8-19
