TM 9-2320-289-20
7-7.
BRAKE SHOE AND WHEEL CYLINDER REPLACEMENT (Con’t).
NOTE
Brake shoe assembly is factory-installed without pivot (16).
8.
Remove hold-down washer (14), spring (15), pivot (16), and pin (18) on secondary brake
shoe (5) side.
9.
Remove adjusting lever (24), adjusting spring (22), and pivot (21) assembly. Disassemble as
required.
10.
Remove adjusting spring (23). Remove clip (6), secondary brake shoe (5), and washer (4)
from parking brake lever (3).
11.
Depress tabs on parking brake cable finger nut, and disconnect parking brake cable from
parking brake lever (3) as required.
TA49666
7-16
