7-8. MASTER CYLINDER AND POWER BOOSTER REPLACEMENT.

c. ADJUSTMENT - TM-9-2320-289-20_411

b. INSTALLATION - TM-9-2320-289-20_413

/.25ton/TM-9-2320-289-20 CUCV Series Trucks at Unit level Manual
Page Navigation
391

TM 9-2320-289-20 7-8. MASTER CYLINDER AND POWER BOOSTER REPLACEMENT. This task covers: a. Removal b. Installation INITIAL SETUP: Equipment Condition MaterialslParts Front brake lines disconnected from • Eight locknuts master cylinder. (See paragraph 7-9) Power booster rod disconnected from service brake pedal (if removing power booster). (See paragraph 7-12) Tools/Test Equipment Power steering lines disconnected from power • Torque wrench booster (if removing power booster). (See paragraph 8-14) a. R E M O V A L NOTE If removing master cylinder (4), perform steps 1 and 2. 1. Remove master cylinder cover bail (2), cover (1), and gasket (3). Inspect cover and gasket for damage and discard as required. 2. Remove 2 locknuts (12), power brake bracket (11), and master cylinder (4). Discard locknuts. TA49671 7-21

Privacy Statement
Press Release
Contact