TM 9-2320-289-20
7-7.
BRAKE SHOE AND WHEEL CYLINDER REPLACEMENT (Con’t).
4.
Remove parking brake strut (8) and strut spring (13). Remove adjusting spring (25).
NOTE
Brake shoe assembly is factory-installed without pivot (16).
5.
Remove hold-down washer (14), spring (15), pivot (16), and pin (18) on primary brake shoe
(17) side. Remove primary brake shoe.
6.
Remove brake shoe guide (7).
7.
Depress bottom of adjusting lever (24). Unhook actuating link (20) from anchor pin (2) and
adjusting lever.
TA49665
7-15
