TM 9-2320-289-20
5-6.
TRANSFER CASE LINKAGE AND CONTROL LEVER ASSEMBLY
MAINTENANCE (ALL EXCEPT M1028A1 AND M1031) (Con’t).
2.
Position actuator lever (9) through housing (11) and install to fork (7) with 2 bolts (10) and new
locknuts (17).
3.
Install actuator lever (9) to housing (11) with bushing (16), washer (15), and nut (14).
4.
Place guide (3) through control lever (2). Install seal (19) and housing (11) with assembled
control lever assembly to floor of truck with 8 bolts (4) and washers (5).
5.
If removed, install operating lever (20) to transfer case (23) with new Iockwasher (28) and nut
(30) .
6.
Install grommet (31) to transfer case end of rod (29). Install rod to operating lever (20) with
washer (21) and new cotter pin (22).
7.
Install nut (27), swivel (26), and nut (25) to threaded end of rod (29). Install grommet (24) to
swivel.
8.
Install swivel (26) to actuator lever (9) with washer (12) and new cotter pin (13).
TA49641
5-13
