TM 9-2320-289-20
4-46.
ACCESSORY WIRING TERMINAL BOARD AND RADIO TERMINAL BOARD
REPLACEMENT (Con’t).
2.
Remove snaprings (13) holding nuts (11) in place and remove nuts if damaged.
3.
Remove nuts (9 or 15) and Iockwashers (7 or 16) as required. Discard Iockwashers.
NOTE
Tag leads and terminals for installation.
4.
Disconnect leads from positive terminal board (5) and negative terminal
required. Remove connectors (6 and 17) and capacitor (22) as required.
board (19) as
NOTE
Tag leads and terminals for installation.
5.
Disconnect radio feed wiring harness (14) leads from upper terminal board (5) and lower
terminal board (19). Remove connectors (6 and 17) as required.
6.
Remove 2 bolts (20) and remove bracket (4) assembly.
7.
Remove 6 bolts (2) and nuts (8), and remove positive accessory wiring terminal board (5).
TA49920
4-99
