TM 9-2320-289-20
4-46. ACCESSORY WIRING TERMINAL BOARD AND RADIO TERMINAL BOARD
REPLACEMENT (Con’t).
3.
Install negative accessory wiring terminal board (19) with 4 nuts (18) and bolts (21).
4.
Install positive accessory wiring terminal board (5) with 6 nuts (8) and bolts (2).
5.
Install bracket (4) assembly with 2 bolts (20).
6.
Position connectors (6 and 17) if removed.
7.
Connect radio feed wiring harness (14) leads to upper terminal board (5) and lower terminal
board (19).
8.
Position 2 connectors (6 and 17) and capacitor (22) if removed.
9.
Connect leads to positive terminal board (5) and negative terminal board (19) if removed.
10.
Install new Iockwashers (7 or 16) and nuts (9 or 15) if removed.
11.
Install nuts (11) on terminal board covers (10 or 12) with snaprings (13) if removed.
12.
Install terminal board covers (10 or 12) by tightening nuts (11).
FOLLOW-ON TASKS:
Connect both battery negative cables. (See paragraph 4-38)
Check operation of radio if radio terminal board was replaced.
TA49922
4-101
