4-48. JUNCTION BOX AND COMMUNICATIONS RACK REPLACEMENT

FOLLOW-ON TASKS - TM-9-2320-289-20_346

4-48. JUNCTION BOX AND COMMUNICATIONS RACK REPLACEMENT (Cont)

/.25ton/TM-9-2320-289-20 CUCV Series Trucks at Unit level Manual
Page Navigation
326

4-104 TM 9-2320-289-20 4-48. JUNCTION BOX AND COMMUNICATIONS RACK REPLACEMENT. This task covers: a. Removal b. Installation INITIAL SETUP: Equipment Condition Both battery negative cables (See paragraph 4-38) Materials/Parts disconnected. Nine Iockwashers Personnel Required MOS 63B ( 2) a REMOVAL Only M1008A1 trucks have NOTE communications racks (14). If removing junction box (4), perform steps 1 and 2. If removing communications rack (14), perform steps 1 and 3 through 6. 1. Disconnect radio feed harness (2) from junction box (4). 2. Remove 4 screws (3), strap (5), and 4 Iockwashers (1). Discard junction box (4). Iockwashers. Remove TA49924

Privacy Statement
Press Release
Contact