4-47. RADIO MOUNTING BRACKET REPLACEMENT (M1009)

FOLLOW-ON TASKS - TM-9-2320-289-20_344

FOLLOW-ON TASKS - TM-9-2320-289-20_346

/.25ton/TM-9-2320-289-20 CUCV Series Trucks at Unit level Manual
Page Navigation
324

TM 9-2320-289-20 4-47. RADIO MOUNTING BRACKET REPLACEMENT (M1009). This task covers: a. Removal b. Installation INITIAL SETUP: Equipment Condition Materials/Parts Communications equipment removed. Six Iockwashers (See appropriate TM) a. REMOVAL If removing If removing 1. Remove 3 bolts (7) and NOTE braces (6), perform steps 1 and 2. radio mounting bracket (1), perform steps 2 and 3. Iockwashers (8). Discard Iockwashers. 2. Remove 3 bolts (3), lockwashers (2), and braces (6) as required. Discard Iockwashers. 3. Remove 3 bolts (5) and washers (4), and remove radio mounting bracket (1). b. INSTALLATION CAUTION Ensure that rear passenger seat is pushed to its most rearward position before installing radio mounting bracket (1). Rack corner and edge of platform could damage seatback. NOTE If installing radio mounting bracket (1), perform steps 1 and 2. If installing braces (6), perform steps 2 and 3. 1. Install radio mounting bracket (1) with 3 washers (4) and bolts (5). NOTE Ensure that longest brace (6) is installed toward front of truck and shortest brace is installed toward rear of truck. 2. Install 3 3. Install 3 braces (6) on radio mounting bracket (1) with 3 new Iockwashers new Iockwashers (8) and bolts (7) on 3 braces (6) and mounting (2) and bolts (3). brackets (9). 4-102

Privacy Statement
Press Release
Contact