TM 9-2320-289-20
4-42.
ENGINE WIRING HARNESS BLOCK REPLACEMENT.
This task covers:
a. Removal
b.
Installation
INITIAL SETUP:
Equipment Condition
Both battery negative cables disconnected. (See paragraph 4-38)
NOTE
Tag leads for installation.
1.
Remove nut (1), nut (2), and 4 leads
(3). Remove 2 bolts (4
wiring harness block (5)
1.
Install engine wiring barn
with 2 bolts (4). Install
with nut (2) and nut (1)
FOLLOW-ON TASKS:
C o n n e ct both battery negative cables. (See paragraph4-38)
TA49915
4-89/(4-90 blank)
