4-41. TRAILER ELECTRICAL RECEPTACLE REPLACEMENT

4-40. SLAVE RECEPTACLE REPLACEMENT (Cont) - TM-9-2320-289-20_331

4-42. ENGINE WIRING HARNESS BLOCK REPLACEMENT

/.25ton/TM-9-2320-289-20 CUCV Series Trucks at Unit level Manual
Page Navigation
311

TM 9-2320-289-20 4-41. TRAILER ELECTRICAL RECEPTACLE REPLACEMENT. This task covers: a. Removal b. Installation INITIAL SETUP: Equipment Condition Both battery negative cables disconnected. (See paragraph 4-38) 1. Remove 4 nuts (7), washers (6), and bolts (5), and remove trailer electrical receptacle door (4). Unplug trailer electrical receptacle (1) from wiring harness (2) and remove. 1. Place trailer electrical receptacle (1) through bumper (3) and connect to wiring harness (2). Aline trailer electrical receptacle holes with holes in bumper. Install trailer electrical receptacle door (4) and trailer electrical receptacle with 4 bolts (5), washers (6), and nuts (7). FOLLOW-ON TASKS: Connect both battery negative cables. (See paragraph 4-38) TA49914 4-88

Privacy Statement
Press Release
Contact