TM 9-2320-289-20
4-34.
FLOODLIGHT AND LAMP REPLACEMENT (M1010).
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Equipment Condition
Materials/Parts
Both battery negative cables disconnected.
One Iockwasher
(See paragraph 4-38)
NOTE
On 1984 model trucks, leads are attached to floodlight housing (3) by
rivets, and to floodlight lamp (1) by screws.
If removing floodlight lamp (1), perform step 1.
If removing floodlight assembly, perform steps 2 and 3.
Tag leads for installation.
1.
Pry floodlight lamp (1) away from floodlight housing (3). Disconnect leads (2) from floodlight
lamp and remove floodlight lamp.
2.
Remove nut (8), Iockwasher (6), and bolt (4).
Disconnect electrical plug from ambulance
body connector. Remove floodlight housing (3).
4-64
