b. INSTALLATION - TM-9-2320-289-20

4-25. BLACKOUT DRIVE LIGHT AND LAMP REPLACEMENT.

4-26. PARKING LIGHT AND LAMP REPLACEMENT

/.25ton/TM-9-2320-289-20 CUCV Series Trucks at Unit level Manual
Page Navigation
275

TM 9-2320-289-20 4-25. BLACKOUT DRIVE LIGHT AND LAMP REPLACEMENT (Con’t). 2. Remove nut (11) and Iockwasher (10). Pull out blackout light housing (4) from mounting bracket (6) and remove 2 washers (12). Disconnect lead (5) and remove housing. Discard Iockwasher. 3. Remove 4 bolts (9), mounting bracket (6), and 4 retaining nuts (7) from radiator support (8). b. INSTALLATION NOTE If installing mounting bracket (6), perform steps 1 and 2. If installing blackout light assembly, perform step 2. If installing lamp (3), perform step 3. 1. Install 4 retaining nuts (7) on radiator support (8). Install mounting bracket (6) with 4 bolts (9). 2. Connect lead (5). Install 2 washers (12) on blackout light housing (4). Install blackout light housing on mounting bracket (6) with new Iockwasher (10) and nut (11). 3. Install lamp (3). Install gasket (13), “O” ring (2), and cover (1). FOLLOW-ON TASKS: Install radiator grille. (See paragraph 10-2) Connect both battery negative cables (See paragraph 4-38) Check operation of blackout light. 4-51

Privacy Statement
Press Release
Contact