TM 9-2320-289-20
4-12.
CAB FLASHERS AND FUSES REPLACEMENT.
This task covers:
a. Replacement
INITIAL SETUP:
Materials/Parts
Fuses (as required) (Items 19-24, Appendix C)
CAUTION
Ensure that fuses of correct amperage rating are installed as indicated.
Failure to follow this caution may result in damage to fuse, fuse box, and
wiring.
NOTE
Fuse box is located on driver’s side of cab under instrument panel. All
fuses and flashers are removed and installed in same way.
1.
Replace fuses and flashers. Check operation of circuit after replacement.
1. Fuse Box
2. Hazard Warning Flasher
3. 20 amp Ambulance Accessories Fuse
4. 20 amp Parking/Marker Light Fuse
5. 20 amp Heater Fuee
6. 10 amp Stoplight Fuse
7. 30 amp Unmarked (Headlight) Fuse
8. 25 amp Windshield Wiper Fuse
9. Turn Signal Flasher
10. 30 amp Gas-Particulate Filter Unit (GPFU) and Air
Conditioner Fuse
11.
12.
13.
14.
15.
16.
17.
18.
15 amp Horn Fuse
10 amp/28 v (Voltmeter) Fuse
5 amp Instrument Panel Lights Fuse
30 amp Flasher, Back-up Lights, and Accessories
Fuse
20 amp Ignition Fuse
5 amp Courtesy Light Fuse
20 amp Engine Control Fuse
5 amp Blackout Marker Fuse
TA49871
4-31
