TM 9-2320-289-20
4-10.1. SPEEDOMETER GEAR REPLACEMENT (ALL EXCEPT M1028A1, M1028A2, AND
M1031).
This task covers:
a.
Removal
b. Installation
INITIAL SETUP:
Equipment Condition
Materials/Parts
Speedometer cable and adapter removed.
One seal
(See paragraph 4-10)
a. REMOVAL
1.
Remove bolt (1) and retainer (2) from transfer case housing (6).
2.
Remove sleeve (4) and speedometer
3.
Remove seal (3) from sleeve (4) and
gear (5).
discard.
1.
Install new seal (3) on sleeve (4).
2.
Install speedometer gear (5) in sleeve (4) and install assembly into transfer case housing (6).
3.
Install retainer (2) on transfer case housing (6) with bolt (1),
(4) .
FOLLOW-ON TASKS:
Install speedometer cable and adapter. (See paragraph 4-10)
indexing retainer with slot in sleeve
TA701831
4-29.0
Change 2
