TM 9-2320-289-20
4-11.
OPEN DOOR BUZZER AND SEATBELT BUZZER REPLACEMENT.
This task covers:
a.
Removal
b. Installation
INITIAL SETUP:
Equipment Condition
Both battery negative cables disconnected. (See paragraph 4-38)
a.
REMOVAL
NOTE
Tag wiring harness connectors for installation.
Step 1 only applies to M1010.
1.
Unplug open door buzzer (2) from
wiring harness (1).
2.
Unplug seatbelt buzzer (3) from
wiring harness (1).
1.
Plug seatbelt buzzer (3) into wiring
harness (1).
NOTE
Step 2 only applies to M1010.
2.
Plug open door
harness (1).
FOLLOW-ON TASKS:
buzzer (2) into wiring
Connect both battery negative cables. (See paragraph 4-38)
Check operation of open door buzzer and seatbelt buzzer.
TA49870
4-30