4-9. VOLTMETER, V O L T M E T E R R E L A Y, A N D G E N E R A T O R 2 R E L A Y REPLACEMENT

b. INSTALLATION - TM-9-2320-289-20_267

FOLLOW-ON TASKS - TM-9-2320-289-20_269

/.25ton/TM-9-2320-289-20 CUCV Series Trucks at Unit level Manual
Page Navigation
247

TM 9-2320-289-20 4-9. VOLTMETER, V O L T M E T E R R E L A Y, A N D G E N E R A T O R 2 R E L A Y REPLACEMENT. This task covers: a. Removal b. Installation INITIAL SETUP: Equipment Condition Instrument cluster plate removed (if removing voltmeter or door ajar housing). (See paragraph 4-7) NOTE If removing voltmeter (6), perform step 1. If removing door ajar housing (3) on M1010 only, perform step 2. Generator 2 relay (7) is on all except M1010. If removing generator 2 relay or voltmeter relay (8), perform step 3. 1. Remove 2 nuts (5) and washers (4), and retaining bracket (1). Remove voltmeter (6) from instrument cluster plate (2). 2. Remove door ajar housing (3) from instrument cluster plate (2). 3. Reach up under bracket (10) beside steering column (9) and disconnect lead (12) from generator 2 relay (7) or lead (11) from voltmeter relay (8). Remove generator 2 relay or voltmeter relay. NOTE generator 2 relay (7) or voltmeter relay (8) for all except If installing M1010, perform step 1. If installing door ajar housing (3) on M1010 only, perform step 1. If installing voltmeter (6), perform step 2. 1. Install generator 2 relay (7) or voltmeter relay (8) on bracket (10) beside steering column (9). Connect lead (12) to generator 2 relay or lead (11) to voltmeter relay. 2. Install door ajar housing (3) on instrument cluster plate (2). TA49867 4-26

Privacy Statement
Press Release
Contact