4-8. GLOW PLUG RELAY AND MODULE REPLACEMENT

FOLLOW-ON TASKS - TM-9-2320-289-20_265

b. INSTALLATION - TM-9-2320-289-20_267

/.25ton/TM-9-2320-289-20 CUCV Series Trucks at Unit level Manual
Page Navigation
245

TM 9-2320-289-20 4-8. GLOW PLUG RELAY AND MODULE REPLACEMENT. This task covers: a. Removal b. Installation INITIAL SETUP: Equipment Condition Materials/Parts Both battery negative cables disconnected Two Iockwashers (if replacing relay). (See paragraph 4-38) NOTE If removing module (2), perform steps 1 and 2. If removing relay (7), perform steps 3-5. 1. Remove glow plug module housing (1) from bracket under instrument panel to left of steering column. 2. Remove end cap (3) and remove glow plug module (2). NOTE Tag leads for installation. 3. Remove 2 nuts (12), lead (11), 2 washers (10), and 2 leads (9). TA49865 4-24

Privacy Statement
Press Release
Contact