TM 9-2320-289-20
4-7.
INSTRUMENT CLUSTER MAINTENANCE (Con’t).
9.
10.
11.
NOTE
Remove all socket (35) assemblies only if removing printed circuit
(33).
If removing socket (35) assemblies without removing instrument
cluster, reach under instrument panel to gain access to socket
assemblies.
Remove 14 socket (35) assemblies
as required by turning.
Remove bulbs (34) from sockets (35)
as required.
Press tangs on back of 3 clips (36)
and push out to remove. Remove
printed circuit (33).
NOTE
If installing printed circuit (33), perform steps 1-3.
If installing bulbs (34), perform steps 2 and 3.
If installing any gages, filters, and gaskets perform steps 4-10 as
required and step 11.
1.
Install printed circuit (33) with 3 clips (36).
TA49860
4-19
