TM 9-2320-289-20
4-7.
INSTRUMENT CLUSTER MAINTENANCE (Con’t).
2.
Press bulbs (34) into sockets (35) so
they lock into place.
NOTE
If installing socket (35) assemblies
without
instrument cluster (7)
removed, reach under instrument
panel to gain access to printed
circuit (33) holes.
3.
Install
socket (35) assemblies
through holes in printed circuit (33)
and instrument cluster (7), and turn.
4.
Install
5.
Install
6.
Install
7.
Install
2 turn signal filters (28).
gasket (29) and high beam filter (30).
gasket (31) and coolant indicator filter (32).
gasket (26) and seatbelt and brake light filter (27).
8.
Position gasket on back of speedometer (13) if removed. Install speedometer with mounting
screw (16).
9.
Install fuel gage (14) with screw (15).
10.
Install generator 1 filter (23), generator 2 filter (22), and 4-wheel drive and oil pressure filter
(24) by pressing into locking tabs on retainer (25).
11.
Install retainer (25) and instrument cluster lens (19) with 6 screws (20).
TA49861
4-20
