TM 9-2320-289-20
4-7.
INSTRUMENT CLUSTER MAINTENANCE.
This task covers:
a. Removal
b. Disassembly
c. Assembly
d. Installation
INITIAL SETUP:
Equipment Condition
Both battery negative cables disconnected.
(See paragraph 4-38)
a. REMOVAL
NOTE
If removing instrument cluster
plate (10), perform steps 1 and
3.
If removing gages, filters, or
gaskets, perform steps 1 and 3,
and DISASSEMBLY steps as
required.
If removing instrument cluster
bulbs and sockets, perform
DISASSEMBLY steps 9 and 10.
1.
Remove 4 screws (3) and steering
column filler (2) from dash panel (1).
Remove 2 screws (5) and steering
column filler (4).
2.
Depress clip on back of speedometer
(13) and disconnect speedometer
cable (6).
NOTE
Tag plugs for installation.
3.
Remove 5 screws (11) and 3 screws
(12). Disconnect plugs from back of
instrument
cluster
plate
(10).
Remove instrument cluster plate.
Materials/Parts
Chalk (Item 9, Appendix C)
4.
Mark cable clip (21) location on
steering
column
for
installation.
Disconnect cable clip. Remove 2
screws (18) and transmission position
indicator (17).
TA49857
4-16
