TM 9-2320-289-20
4-5.
STARTER AND STARTER RELAY REPLACEMENT (Con’t).
WARNING
Support starter (7) during installation. Failure to support starter may cause
it to fall, resulting in injury to personnel.
2.
Install starter shield (2) with screw (1) if removed. Support starter (7) and install with inner
screw (9). DO NOT tighten screw (9). Install outer screw (9) through starter. Tighten screws to
33 Ib.-ft. (45 N•m).
NOTE
Ensure that battery terminal lead (12) tab is positioned in slot on solenoid
(11).
3.
Install new Iockwasher (13), solenoid terminal lead (14), and battery terminal lead (12) with 2
nuts (15) on solenoid (11).
TA49855
4-13
