TM 9-2320-280-34
22-9.3. LEFT REAR FLOOR PANEL REPAIR (Cont'd )
l. Insert Panel and Left Rear Floor Panel Installation
NOTE
If vehicle is not equipped with left rear seat support, proceed to
step 3.
1.
Apply approximately 0.125-in. thickness of adhesive sealant to inner shaded area (2) of
insert panel (1).
2.
Apply approximately 0.125-in. thickness of adhesive sealant to outer shaded area (3) of
insert panel (1).
NOTE
If vehicle is not equipped with left rear seat support, proceed to
step 5.
3.
Apply adhesive sealant to inner shaded area (4) on underside of left rear seat support (11).
4.
Apply approximately 0.125-in. thickness of adhesive sealant to outer shaded area (5) on underside
of left rear panel (6).
5.
Position insert panel (1) to underside of left rear floor panel (6).
6.
Install insert panel (1) on left rear seat support (11) with ten rivets (8).
7.
Secure insert panel (1) on underside of left rear seat support (11) with five rivets (9).
8.
Secure insert panel (1) on left rear floor panel (6) with thirteen rivets (7) and eighteen rivets (10).
22-16.48
Change 1
