TM 9-2320-280-34
22-9.3. LEFT REAR FLOOR PANEL REPAIR (Cont'd )
9.
Apply approximately 0.125-in. thickness of adhesive sealant to metal strip G (1).
10.
Apply adhesive sealant to shaded area of left rear floor panel (8) and insert panel (7).
11.
Position metal strip G (1) on left rear floor panel (8) and insert panel (7) and install three rivets (9).
12.
Using metal strip G (1) as a template, locate and drill eleven 0.187-in. diameter holes through left
rear floor panel (8) and insert panel (7).
13.
Secure metal strip G (1) on left rear floor panel (8) and insert panel (7) with eleven rivets (5).
14.
Apply approximately 0.125-in. thickness of adhesive sealant to metal strip H (2).
15.
Apply adhesive sealant to area shaded on left rear floor panel (8) and insert panel (7).
16.
Position metal strip H (2) on left rear floor panel (8) and insert panel (7) and install three rivets (6).
17.
Using metal strip H (2) as a template, locate, mark, and drill eleven 0.187-in. diameter holes
through left rear floor panel (8) and insert panel (7).
18.
Secure metal strip H (2) on left rear floor panel (8) and insert panel (7) with four rivets (4) and
seven rivets (3).
19.
Spot-paint insert panel (7) and left rear floor panel (8) (TM 43-0139).
22-16.50
Change 1