TM 9-2320-280-34
22-9.3. LEFT REAR FLOOR PANEL REPAIR (Cont'd )
k. Left Rear Floor Panel and Insert Panel Drilling
1.
Position insert panel (2) to underside of left rear floor panel (1).
NOTE
If vehicle is not equipped with left rear seat support installed,
proceed to step 3.
2.
Using left rear seat support (3) as a template, mark sixteen hole locations (4) on insert panel (2).
3.
Using insert panel (2) as a template, mark forty-two hole locations (5) on underside of left rear floor
panel (1). Remove insert panel (2).
4.
Drill forty-two 0.187-in. diameter holes through underside of left rear floor panel (1).
5.
Drill nine 0.187-in. diameter holes through insert panel (2).
22-16.46
Change 1
