TM 9-2320-280-34
22-9.3. LEFT REAR FLOOR PA NEL REPAIR (Cont'd )
j. Metal Strip Fand Insert Panel Assembly
1.
Position metal strip F (1), with arrow facing up and toward metal strip C (3), on insert
panel (2). Align reference lines (3).
2.
Using metal strip F (1) as a template, locate, mark, and drill ten 0.187-in. diameter holes in
insert panel (2). Remove metal strip F (1).
3.
Apply approximately 0.125-in. thickness of adhesive sealant to shaded surface of insert panel (2)
and metal strip F (1).
4.
Position metal strip F (1) on insert panel (2) and install with ten rivets (4).
5.
Remove any adhesive residue and clean edges on metal strip F (1) and insert panel (2).
22-16.44
Change 1
