TM 9-2320-280-34
22-9.3. LEFT REAR FLOOR PA NEL REPAIR (Cont'd )
i. Metal Strip E and Insert Panel Assembly
1.
Position metal strip E (2), with arrow facing up and toward metal strip C (4), on insert
panel (1). Align reference lines (3).
2.
Using metal strip E (2) as a template, locate, mark, and drill seven 0.187-in. diameter holes
through insert panel (1). Remove metal strip E (2).
3.
Apply approximately 0.125-in. thickness of adhesive sealant to shaded surface of insert panel (1)
and metal strip E (2).
4.
Position metal strip E (2) on insert panel (1) and install with seven rivets (5).
5.
Remove any adhesive residue and clean edges on metal strip E (2) and insert panel (1).
22-16.42
Change 1