TM 9-2320-280-34
22-9.3. LEFT REAR FLOOR PA NEL REPAIR (Cont'd )
h. Metal Strip D and Insert Panel Assembly
1.
Position metal strip D (1), with arrow facing up and toward metal strip C (4), on insert panel (2).
Align reference lines (3).
2.
Using metal strip D (1) as a template, locate, mark, and drill seven 0.187-in. diameter holes
through insert panel (2). Remove metal strip D (1).
3.
Apply approximately 0.125-in. thickness of adhesive sealant to shaded surface of insert panel (2)
and metal strip D (1).
4.
Position metal strip D (1) on insert panel (2) and install with seven rivets (5).
5.
Remove any adhesive residue and clean edges on metal strip D (1) and insert panel (2).
22-16.40
Change 1
