TM 9-2320-280-34
22-9.3. LEFT REAR FLOOR PA NEL REPAIR (Cont'd )
f. Reinforcement Strip B and Insert Panel Assembly
1.
Position reinforcement strip B (1) on insert panel (2), and align reference lines (3) with edges of
reinforcement strip B (1).
2.
Using reinforcement strip B (1) as a template, locate, mark, and drill eighteen 0.187-in. diameter
holes through reinforcement strip A (4) and insert panel (2).
3.
Apply approximately 0.125-in. thickness of adhesive sealant to shaded surface of reinforcement
strip A (4) and reinforcement strip B (1).
4.
Position reinforcement strip B (1) on reinforcement strip A (4) and install with eighteen rivets (5).
5.
Remove any adhesive residue and clean edges of reinforcement strip B (1), reinforcement strip A (4)
and insert panel (2).
22-16.36
Change 1
