TM 9-2320-280-34
22-9.3. LEFT REAR FLOOR PA NEL REPAIR (Cont'd )
NOTE
Do not cut through rear seat support when removing left rear
floor panel section.
4.
Using scribed outline marked in step 3, cut and remove floor panel (3) from left rear floor panel (1).
5.
Remove sharp edges and burrs from left rear floor panel (1).
6.
Remove adhesive residue and clean left rear seat support (2).
7.
Position insert panel (4), with arrow facing down and toward front of vehicle, on underside of left
rear floor panel (1).
8.
Obtain a minimum clearance of 0.10 in. between edges of insert panel (4) and left rear floor panel (1).
9.
Remove insert panel (4).
10.
Locate and mark four reference lines (5) on left rear floor panel (1).
22-16.32
Change 1
