TM 9-2320-280-34
22-9.3. LEFT REAR FLOOR PANEL REPAIR (Cont'd )
d. Left Rear Floor Panel Removal
NOTE
If vehicle is not equipped with left rear seat support installed,
proceed to step 2.
1.
Using a 0.187-in. drill bit, remove nine rivets (5) from left rear seat support (4) and left rear floor panel (3).
2.
Position insert panel (6), with arrow facing down and toward front of vehicle, to underside of left rear
floor panel (3) and align mount hole (7).
3.
Using insert panel (6) as a template, scribe outline (8) on left rear floor panel (3).
Change 1
22-16.31
