TM 9-2320-280-34
22-9.3. LEFT REAR FLOOR PANEL REPAIR (Cont'd )
c. Metal Strips Fabrication
1.
Cut two metal strips (2) from sheet metal, and mark two reference lines (1), centerline (3), and
directional arrow (4). Identify two metal strips (2) as C and D.
2.
Place metal strips C and D (2) on a suitable work surface with arrow (4) facing up and left.
3.
Locate, mark, and drill twenty-four 0.187-in. diameter holes through metal strips C and D (2).
4.
Bend metal strips C and D (2) 1.50 in.
22-16.28
Change 1
