TM 9-2320-280-34
22-9.3. LEFT REAR FLOOR PA NEL REPAIR (Cont'd )
b. Reinforcement Strips Fabrication
1.
Cut reinforcement strip (1) from sheet metal, and mark four reference lines (2), centerline (3), and
letter A on reinforcement strip (1).
2.
Locate, mark, and drill fourteen 0.187-in. diameter holes and one 0.750-in. diameter hole through
reinforcement strip A (1).
3.
Remove all burrs and round all sharp edges on reinforcement strip A (1).
22-16.26
Change 1
