TM 9-2320-280-34
19-3. DIFFERENTIAL REPAIR (Cont'd)
8.
Install rear pinion bearing (2) on pinion gear (1).
NOTE
Do not install a replacement pinion nut and shim assortment at this
time as the pinion gear will be removed after depth measurement.
9.
Rotate housing (3) 90 degrees and install pinion gear (1).
10.
Install front pinion bearing (4), dirt deflector (4.1), pinion yoke (5), and original pinion nut (6).
11.
Tighten locknut (6) only enough to remove pinion bearing end play.
6
5
4.1
4
3
1
Change 2
