TM 9-2320-280-34
19-3. DIFFERENTIAL REPAIR (Cont'd)
4.
Rotate housing (2) so front pinion bearing cup bore faces up.
5.
Lubricate outside diameter of front pinion bearing cup (1) with lubricating oil. Using driver handle
and front pinion bearing cup installer, install cup (1) in housing (2).
NOTE
If repairing P/N 5593882, perform steps 6 through 22 and 37
through 41. If repairing P/N 12342615, perform steps 23
through 36.
6.
Rotate housing (2) 180 degrees. Lubricate outside diameter of rear pinion bearing cup (3) with
lubricating oil.
NOTE
If the pinion shim is beveled, be sure the beveled side faces
bottom of bearing cup bore.
7.
Using driver handle and rear pinion bearing cup installer, install "starter shim" (4) and rear pinion
bearing cup (3) in housing (2).
DRIVER
DRIVER
HANDLE
HANDLE
FRONT PINION
BEARING CUP INSTALLER
REAR PINION
BEARING CUP INSTALLER
19-13
