TM 9-2320-280-34
19-3. DIFFERENTIAL REPAIR (Cont'd)
NOTE
If repairing P/N 5593882, perform steps 37 through 41, then
proceed to step 42.2
37.
Rotate housing (3) 90 degrees. Remove locknut (6), pinion yoke (5), and dirt deflector (4.1) from
pinion gear (7). Discard locknut (6).
38.
Install cover (2) with two capscrews (1) on housing (3).
39.
Drive pinion gear (7) out of front pinion bearing (4).
40.
Remove two capscrews (1), cover (2), pinion gear (7), and front pinion bearing (4) from housing (3).
6
5
4.1
4
3
2
1
7
19-18
Change 2
