TM 9-2320-280-34
This task covers:
a.
Removal
b. Installation
INITIAL SETUP:
Applicable Models
Materials/Parts
M998, M998A1, M1038, M1038A1
Silicone sealant (Appendix B, Item 43)
Tools
Light diverter fabricate (Appendix C, Fig. 20)
General mechanic's tool kit:
Maintenance Level
automotive (Appendix G, Item 1)
Direct support
NOTE
To prevent the heater from being starved of air, the diverter
assembly can be modified. Modification can be accomplished at
unit commanders discretion.
a. Removal
1.
Remove four screws (3) and ventilator (2) from body (1).
2.
Remove four screws (5) and diverter (4) from body (1).
b. Installation
1.
Install diverter (4) on body (1) with four screws (5).
2.
Apply a light bead of silicone sealant on ventilator (2). Install ventilator (2) on body (1) with four screws
(3).
