TM 9-2320-280-34
14 - 28 . AMBULANCE WINDSHIELD REPLACEMENT (Cont' )
d
12.
Install three hinge pins (3) in lower hinges (4) and front hinges (2) with three hitch pins (1).
13.
Install two washers (6) and capscrews (5) securing front of body (7) to cargo floor (8). Tighten
capscrews (5) to 60 lb-ft (81 N.m).
NOTE
Perform steps 14 and 15 for M996 and M996A1 only.
14.
Connect heater fuel line (10) to shut-off valve (9).
15.
Open heater fuel shut-off valve (9) at heater fuel line (10).
16. Install three clamps (14) on intercom cable (17), and antenna cables (16) on windshield (13) with three
screws (15).
17.
Install shims (18) between rear windshield mounting brackets (19) and windshield (13) as required to fill
gap.
18.
Secure two rear windshield mounting brackets (19) on windshield (13) with six washers (20) and
capscrews (21). Tighten capscrews (21) to 15 lb-ft (20 N.m).
14-140
