TM 9-2320-280-34
14-3. ROOF REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Applicable Models
Manual References
All except M996, M996A1, M997, M997A1,
TM 9-2320-280-20
M997A2, M998, M998A1, M1035, M1035A1,
TM 9-2320-280-24P
M1035A2, M1037, M1038, M1038A1,
Personnel Required
M1042, M1097, M1097A1, M1097A2
One mechanic
Tools
One assistant
General mechanic's tool kit:
Equipment Condition
automotive (Appendix G, Item 1)
Weapon station tray removed
Materials/Parts
(TM 9-2320-280-20).
Sixteen locknuts (Appendix E, Item 63)
Maintenance Level
Plain assembled nut (Appendix E, Item 124)
Direct support
Sealing compound (Appendix B, Item 49)
NOTE
It may not be necessary to perform the following procedure if
damage is isolated to blast shield. Refer to (para. 14-7) for
replacement of blast shield.
a. Removal
1.
Remove twelve locknuts (5), washers (2), capscrews (1), washers (2), and six roof retainers (3) from
bearing (4). Discard locknuts (5).
NOTE
Perform step 2 for M966, M966A1, M1036, M1045, M1045A1,
M1045A2, M1046, and M1046A1 TOW vehicles only.
2.
Remove plain assembled nut (7) from screw (6) to free TOW wiring harness clamp (8) (at right front
"B" pillar cover screw (6) only). Discard plain assembled nut (7).
3
1
6
2
7
8
4
2
5
Change 2
