TM 9-2320-280-34P
14-3. ROOF REPLACEMENT
b.
Installation
1.
Apply sealing compound on roof mounting ledges (1) at body sides.
2.
Install four roof mounts (5) and snubber plates (4) on ring mount supports (8).
3.
Install roof (3) on ring mount supports (8).
4.
Install four bushings (9), roof mounts (5), and snubber plates (4) on ring mount supports (8).
5.
Install four roof mounting plates (2) in roof (3), and secure roof (3) to ring mount supports (8) with
washers (10), studs (11), and locknuts (12).
6.
Install roof (3) to "B" pillar covers (13) with four washers (7) and screws (6).
7.
Tighten four locknuts (12) to 37 lb-ft (50 N.m).
14-4
