TM 9-2320-280-34
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Tools
Equipment Condition
General mechanic's tool kit:
Radiator removed (TM 9-2320-280-20).
automotive (Appendix G, Item 1)
Right front upper control arm removed
(TM 9-2320-280-20).
Materials/Parts
Lower radiator tube removed
Three lockwashers (Appendix E, Item 107)
(TM 9-2320-280-20).
Eight locknuts (Appendix E, Item 65)
Right front caliper to tee brake line
Five locknuts (Appendix E, Item 66)
removed (TM 9-2320-280-20).
Sealing compound (Appendix B, Item 53)
Lower control arms removed
(TM 9-2320-280-20).
Manual References
Differential removed (para. 9-5).
TM 9-2320-280-20
Differential support brackets and side
TM 9-2320-280-24P
mounting brackets removed (para. 12-16).
Maintenance Level
Direct support
a. Removal
1.
Remove three capscrews (4), lockwashers (3), washers (2), and pull steering gear (1) away from left
frame rail (5). Discard lockwashers (3).
2.
Remove three capscrews (12) and vent line clamps (11) from rear crossmember (17).
NOTE
Note direction of capscrews for installation.
3.
Remove four locknuts (15), washers (16), capscrews (19), washers (16), and vent line bracket (20)
from rear crossmember (17) and right frame rail (10). Discard locknuts (15).
4.
Remove three locknuts (9), washers (7), capscrews (8), washers (7), and vent line bracket (6) from
rear crossmember (17) and frame rail (5). Discard locknuts (9).
5.
Remove capscrew (21) and washer (22) from rear crossmember (17) and frame rail (5).
6.
Remove six locknuts (18), washers (14), capscrews (13), and washers (14) from rear
crossmember (17) and left and right rear crossmember mounting brackets (23). Discard
locknuts (18).
7.
Slide rear crossmember (17) and left and right crossmember mounting brackets (23) down and out
from under vehicle.
8.
Remove left and right crossmember mounting brackets (23) from rear crossmember (17).
Change 2
