TM 9-2320-280-34
12-18. FRONT SUSPENSION REAR CROSSMEMBER REPLACEMENT (Cont'd)
7.
Tighten capscrew (18) to 65-78 lb-ft (88-106 Nm).
Tighten three capscrews (4) to 90 lb-ft (122 Nm).
8.
Tighten four capscrews (16) to 90 lb-ft (122 Nm).
9.
Tighten six capscrews (9) to 90 lb-ft (122 Nm).
10.
11.
Install vent line (11) on rear crossmember (14) with three clamps (7) and capscrews (8).
12.
Install steering gear (21) on frame rail (1) with three washers (22), lockwashers (23), and cap-
screws (24). Tighten capscrews (24) to 60 lb-ft (81 Nm).
FOLLOW-ON TASKS:
Install
differential support brackets and side mounting brackets (para. 12-16).
Install
differential (para. 9-5).
Install
lower control arms (TM 9-2320-280-20).
Install
right front caliper to tee brake line (TM 9-2320-280-20).
Install
right front upper control arm (TM 9-2320-280-20).
Install
lower radiator tube (TM 9-2320-280-20).
Install
radiator (TM 9-2320-280-20).
