TM 9-2320-280-34
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Tools
Equipment Condition
General mechanic's tool kit:
Hood raised and secured (TM 9-2320-280-10).
automotive (Appendix G, Item 1)
Maintenance Level
Materials/Parts
Direct support
Three locknuts (Appendix E, Item 65)
Manual References
TM 9-2320-280-10
TM 9-2320-280-24P
a. Removal
1.
Remove locknut (1), washer (2), capscrew (4), and washer (2) securing splash shield (3) to
bracket (7). Discard locknut (1).
2.
Remove two locknuts (5), washers (6), capscrews (9), washers (6), and bracket (7) from frame
rail (8). Discard locknuts (5).
b. Installation
1.
Install bracket (7) on frame rail (8) with two washers (6), capscrews (9), washers (6), and lock-
nuts (5). Tighten locknuts (5) to 90 lb-ft (122 Nm).
2.
Install splash shield (3) on bracket (7) with washer (2), capscrew (4), washer (2), and locknut (1).
Tighten capscrew (4) to 15 lb-ft (20 Nm).
FOLLOW-ON TASK: Lower and secure hood (TM 9-2320-280-10).
Change 2
