TM 9-2320-280-34
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Tools
Equipment Condition
General mechanic's tool kit:
Coil spring removed (TM 9-2320-280-20).
automotive (Appendix G, Item 1)
Maintenance Level
Materials/Parts
Direct support
Four locknuts (Appendix E, Item 66)
Manual References
TM 9-2320-280-20
TM 9-2320-280-24P
a. Removal
NOTE
The procedures for removing and installing the four spring seats
are basically the same. This procedure covers the right front
spring seat.
Remove four locknuts (6), washers (4), capscrews (5), washers (4), two spring brackets (3), and spring
seat (1) from frame rail (2). Discard locknuts (6).
b. Installation
Install two spring brackets (3) and spring seat (1) on frame rail (2) with four washers (4), capscrews (5),
washers (4), and locknuts (6). Tighten locknuts (6) to 260 lb-ft (353 Nm).
5
2
3
4
1
4
6
FOLLOW-ON TASK: Install coil spring (TM 9-2320-280-20).
12-3
