TM 9-2320-280-34
6-9. BODY WIRING HARNESS REPLACEMENT (Cont'd)
9.
Disconnect harness leads 67C (30) and 67E (31) from parking brake switch (25).
10.
Disconnect harness leads 14A (1), 14B (2), and 40F (34) from shift controls housing (35).
NOTE
Perform step 11 for M1035, M1035A1 and M1035A2 only.
11.
Disconnect harness leads 467C (32) and 457D (33) from shift controls housing (35).
12.
Remove screws (11) and (8), clamps (7) and (9), and harnesses (6) and (10) from body (21).
NOTE
Perform step 13 for 6.5 L only.
13.
Disconnect harness leads (14) and (15) from transmission and transfer case indicator lights (12)
and (13).
14.
Remove two screws (24), clamp (22), and harness (6) from body (21).
15.
Remove capscrew (18), nut (20), clamp (19), and harness (6) from body (21).
16.
Remove assembled locknut (29), capscrew (17), clamp (16), and harness (6) from parking brake
boot (26). Discard assembled locknut (29).
17.
Remove capscrew (5), nut (3), clamp (4), and harness (6) from body (21).
18.
Remove four capscrews (23), locknuts (28), clamps (27), and harness (6) from body (21). Discard
locknuts (28).
19.
Disconnect harness lead 36A (36) from engine oil pressure sending unit (37).
20.
Disconnect harness leads 33A (40) and 58B (41) from engine harness leads 33A (39) and 58B (38).
NOTE
Perform steps 21 and 22 for 6.5 L only.
21.
Remove screw (45), clamp (48), nut (49), and body harness (47) from dipstick support bracket (46).
22.
Disconnect two leads 458A (42) from leads 458c (44) and 458d (43).
23.
Disconnect harness leads 28A (52) and 58C (53) from fuel tank jumper harness (51).
24.
Remove three screws (55), clamps (54), and harness (6) from body (21).
25.
Remove three screws (56), clamps (50), and harness (6) from body (21).
5
7
6
8
4
3
12
13
2
9
1
11
10
29
30
16
31
17
32
25
18
33
26
34
28
19
35
20
27
21
15
6
14
22
23
24
Change 2
