TM 9-2320-280-34
6-8. ENGINE WIRING HARNESS REPLACEMENT (Cont'd)
4.
Remove capscrew (18), nut (20), clamp (19), and harness (16) from bracket (17).
5.
Remove nut (15), lockwasher (14), clamp (13), and harness (16) from cylinder block (12). Discard
lockwasher (14).
NOTE
Perform steps 6 and 7 for 6.2 L only.
6.
Disconnect harness connector 315C (23) from transmission connector (22).
7.
Remove screw (25), clamp (24), and harness (16) from transmission (21).
6-69
