TM 9-2320-280-34
6-8. ENGINE WIRING HARNESS REPLACEMENT (Cont'd)
NOTE
Perform steps 35 through 37 for 200 amp regulator only.
Prior to removal, tag leads for installation.
35.
Slide back rubber boot (15) and remove nut (14), lead 5A (13), and washer (12) from red (energize)
terminal (11).
36.
Slide back rubber boot (1) and remove nut (2), lead 2A (3), and washer (4) from yellow (AC)
terminal (5).
37.
Slide back rubber boot (7) and remove nut (8), lead (6), and washer (9) from terminal (10).
6-74
